Line level driver

Part Number: LL6A
  • Six inputs and outputs
  • 100 watts of speaker level input at 4ω
  • 9.5v line level output
  • Signal sensing or manual turn on function with output
  • Auto summing - takes 2 channels of input, sends up to 6 channels of output w/o using jumpers
  • Remote level for bass channel with auxilary input switching
  • Dimensions: 9.25 (L) x 6.5 (W) x 1.5 (H)

Think you have too much of something, or is something missing? Memphis can help with virtually everything from putting the control of your system at your fingertips to giving your amplifier a much needed input boost.

General Specifications
Description Remote level for bass channel with auxiliary input switching
Max Input 100w @ 4Ω
Max Output 9.5v line level output
I would recommend a
By: Siham  |  On: 10/20/2015

I would recommend a 150amp in line fuse. You may not need an alt udgrape. Determine what 4 channel you are after and add up the total power of all amps in your system. Then contact Kinetik or XS Power for what battery these recommend for your total power.

Write a review for this item.